Modern Sleek™ | Hidden camera detector

How it Works?

Simply turn on the hidden camera detector, extend the wand, and walk around with it until it starts beeping. If it beeps loudly and continuously, especially when you have it set to a low sensitivity, it's very likely you're near a hidden camera. You can then use the red light to confirm the presence of a hidden camera. If you see a blinking red dot while using the red light, that's most likely a camera lens!

How does the Radio Waves Detection Work?

Wireless bugs transmit RF (radio frequency) signals such as WiFi signals, GSM cellular signals, etc. The RF Bug Detector picks up these signals, shows greater signal strength on the signal strength indicator as you get closer to the source, and finally alerts you with a sound or vibration. Please turn off electronic devices known to emit RF signals before searching to eliminate any RF interference or signal interference, such as cell phones, radios, WiFi routers, microwave ovens, telephones, etc.

Easy-to-Use Hidden Camera Detector

A: Detect Radio Waves (Wireless Cameras/Eavesdroppers)

1. Power On: Press and hold the power switch for 3-5 seconds. Release when you hear a beep and see the blue indicator light.
2. Detection: Blue light flashing and an audible prompt indicate a signal source. More blue lights mean a stronger signal.
3. Adjust Sensitivity: Click the sensitivity button to increase blue lights and expand the search range. Adjust sensitivity to narrow down the emission source.
4. Vibration Mode: Switch to vibration mode by pressing the power button once.

B: Detect Invisible Cameras (Recommended: Turn Off Room Lights)

1. Activate Infrared Lights: Short press the "Mode" key to light up the infrared lights. Adjust the flashing speed by pressing the sensitivity button.
2. Scan Environment: Move the detector around and look through the attached filter. A bright flashing spot indicates a camera lens.

C: GPS Magnetic Field Detection

1. Activate GPS Mode: Press the mode switch to green light.
2. Detect Magnetic Fields: Bring the sensor close to the magnetic source. Blue light and buzzer alarm indicate a magnetic field.
3. Vibration Mode: Switch to vibration mode by pressing the power button once.

Charging: Use the TYPE-C charger. Red light indicates charging, and it turns off when fully charged.

Ensure your privacy and security with our easy-to-use Hidden Camera Detector. Detect wireless eavesdroppers, invisible cameras, and GPS trackers with confidence.